LINK
LINK - HANGER
Designed By Beat Glasser
Classic Mounted with two screws on the wall, and two protruding elements with rubber to prevent bags and jackets from slipping, with a steel tray built on top of it - so simple is Link, the classic wardrobe with everything it needs.
This is a classical coat rack of highly practical value. Link is firmly fastened to the wall with two screws. The bottom-ends of both tubes are welded with precision and are each provided with a rubber buffer so that the jacket or bag remains in its proper place.
INFORMATION
DIMENSIONS
- Width 90, 12 and 30 inch
- Height 16 inch
MOUNTING PARTS
- Two wall pugs - Two mounting screws
DOWNLOADS
↓ Product sheet
↓ Mounting instruction
↓ Catalog
↓ Link 3d files
↓ Collections
DESIGNER
Beat Glässer
MATERIAL
- 1 Coatrack link
FINISHES
- Chromed tubular steel - Rubber statements - Filing of sheet steel powder coated in black or white.
MOUNTING INSTRUCTION
CARE
- Clean with soft if necessary moist cloth. - Do not use any abrasive cleaning product. - Drill two hall into the wall using a 8 mm drill (in case of difficult wall, use 2-3 mm drill). - Mounting plug and screw, leaving about 5 mm distance between wall and screwhead. - Then stack into coat rack and shift it down to fix. - If it does not fit tight, screw in the screws a little bit more and tight and try again.
