Forma&Cemento "Cezanne" Oval Concrete Painting Decorative Panels
"CEZANNE" OVAL CONCRETE PAINTING DECORATIVE PANELS
"CEZANNE" OVAL CONCRETE PAINTING DECORATIVE PANELS
Designed by Serena Confalonieri
"Cezanne" Oval Concrete Painting is one of the three material paintings designed by Serena Confalonieri.
The three paintings are characterized by the strong dialogue with the European artistic tradition of still lifes, of which Cézanne - who inspires the name of the creations - is a masterful interpreter.
INFORMATION
PRODUCTION
Made in Italy
BRAND
Forma&Cemento
PRODUCT TYPE
Decorative Panels
DESIGNERS
Serena Confalonieri
PRODUCTION TIME
From 7 to 8 weeks
MATERIAL
Concrete Painting
SHAPE
Oval
USE
Wall
DOWNLOADS
↓ Material
↓ Colors
DIMENSIONS
- Height : 2 cm
- Width : 120 cm
- Depth : 80 cm
CARE
- Neutral Detergent : For routine cleaning use a neutral detergent diluted in water, better if warm, rinse often the cloth in the detergent solution, squeezing it well afterwards. If oil, wine or other liquids fall on the item remove them as soon as possible. Avoid leaving liquids or wet cloths on the concrete surface for a long period of time in order to avoid the making of shades in the affected area.
- Do Not Use Abrasive Products : The product is 100% Made in Italy and handmade by our highly trained staff through accurate and complex craftmanship. As a fully artisanal product it is not subject to CE certification.
HANDMADE
Forma&Cemento's products are handmade in ultra high performing cement mortar! Our production process is completely artisanal and for this reason each piece is unique and no two are the same. To preserve the beauty of our concrete and highlight its peculiar features we use colour pigments which are poured directly into the concrete mixture.
Any imperfections on the surface such as chromatic variations, porosity, fine cracks, and granulations of different colors are characteristics of the material and of the artisan process;for this reason they are not to be considered defects.
MATERIAL
AGGREGATES
Our concrete products are manufactured by hand using a traditional mix of aggregates, sand and cement. Sometimes, the aggregates may be visible within the surface enhancing the natural and unique texture of the material.
SURFACE COLOUR VARIATION
The different materials mixed together to create concrete can cause colour variations on the surface . These peculiar variations in tone and texture make the material naturally unique.
BUG HOLES
During the casting process some air could be trapped within the concrete and it can sometimes cause small holes within the surface. These holes can vary in size and they add to the texture a distinctive aesthetic.
BLEEDING
Since concrete is cast in its liquid state, sometimes some tectural flow lines can be visible on the surfaces. This feature tends to be more visible when casting curved or tall vertical surfaces and is another typical characteristic of concrete.
CRAZING
Small, fine cracks on the surface of the concrete products are very common and they do not impact their structural quality or performance. Each piece is subjected to an accurate quality check to insure durability and stability.
EDGE PATINATION
Some concrete pieces require two-part moulds to be made. The junction between the two molds can result in a different texture around the edges. This method creates a more raw, distinguished texture.
COLORS
COLORS
-Silver -White -Powder -Flamingo -Brick -Cream -Gianduia -Dark Chocolate -Ardesia -Ink -Fir -Ultramarine -Sky -Aubergine -Bubblegum -Plum -Butter -Caramel -Cappuccino -Honey
