Groovymagnets Magnetic Sticker Marble White

MAGNETIC STICKER MARBLE WHITE

MAGNETIC STICKER MARBLE WHITE

This unique magnetic sticker (Ƙ 60 cm) with marble print gives a natural feel to your home or office.

Stick a note or photos on the sticker with magnets or plant a flower in a wall planter. Also very stylish with a wooden magnetic shelf or lamp.

Groovymagnets Magnetic Sticker Marble White

INFORMATION 

BRAND

Groovymagnets

PRODUCT TYPE

Wall Prints

PRODUCTION

Made in Belgium

PRINT

Marble Print

WRITABLE STICKERS

Check the product page on our website for the right use.

CARE & USAGE

-Cleaning the sticker : All our stickers are water-resistant. Clean with a damp cloth and a drop of washing-up liquid. Remove stubborn streaks with a magic eraser (melamine sponge) and a drop of washing-up liquid.
-Writable stickers : Check the product page on our website for the right use ofwriting material suitable for your type of sticker.

Groovymagnets Magnetic Sticker Marble White

STRUCTURE

Apply to a smooth, degreased surface using a hair dryer

WASH

Washable with a Damp Cloth.

RESISTANT

Water-resistant

DIAMETER

60 cm (23.62")

Groovymagnets Magnetic Sticker Marble White

THE RIGHT UNDERGROUND/ PREPARATION -CLEAN

Degrease the surface with lukewarm water and cleaning vinegar. Rinse again with lukewarm water. Do not use ammonia when cleaning because it can affect the adhesive of the sticker.

FLAT / SMOOTH

-Groovy Magnets magnetic stickers adhere to almost any smooth -Surface such as: metal -Wood, glass -Cardboar -Paper -Plastic -kitchen cupboards -Smooth painted walls and doors. If necessar -Smooth and sand down any bumps. Small bumps or -Unevenness in the surface can remain visible through the sticker after applying

USE INDOORS

Groovy Magnets magnetic stickers are suitable for use indoors.

INSTRUCTIONS

Apply to a smooth, degreased surface using a hair dryer

PRINTS

Groovymagnets Magnetic Sticker Marble White
Emerald
Groovymagnets Magnetic Sticker Marble White
White
Groovymagnets Magnetic Sticker Marble White
Rosette

APPLICATION

AVOID AIR TUNNELS

Stick the sticker on the wall within 2 hours after removing it from the packaging. When a rolled-up sticker is opened, air tunnels may occur in the backing sheet which can dry out the adhesive layer.

STICK IT ON

First remove part of the top of the backing sheet from the sticker. Position the sticker on the surface and press firmly. Now gently pull the back sheet further downwards and work your way to the bottom. Meanwhile, rub the sticker firmly with a soft cloth or a (soft) pressure roller

APPLY THE STICKER

To ensure that the glue sticks properly to the wall, a hair dryer comes into play. Heat the front and the edges of the sticker with a hair dryer and press firmly. The heat makes the glue supple and gives optimum adhesion

Groovymagnets Magnetic Sticker Marble White

REMOVE THE STICKER

Warm the sticker with a hairdryer and carefully peel it off bit by bit. Always keep heating every piece well. Depending on the substrate or the quality of the painted surface, it will be easier to remove the sticker. The longer the sticker is on a substrate, the more firmly it sticks. For a smooth painted surface removing will be easier than for a wallpapered wall.

GALLERY

Groovymagnets Magnetic Sticker Marble White
Groovymagnets Magnetic Sticker Marble White
Groovymagnets Magnetic Sticker Marble White
Groovymagnets Magnetic Sticker Marble White
Groovymagnets Magnetic Sticker Marble White
Groovymagnets Magnetic Sticker Marble White
Groovymagnets Magnetic Sticker Marble White
Groovymagnets Magnetic Sticker Marble White
Groovymagnets Magnetic Sticker Marble White