Groovymagnets Natural Silk Magnetic Sticker
NATURAL SILK MAGNETIC STICKER
NATURAL SILK MAGNETIC STICKER
The vibrant colour dots lift your interior spot to a higher level with fabric, structure and colour.
This magnetic sticker immediately brings depth to the wall. The soft, woven textile look & feel invites you to dress up the sticker with your own nuances.
Follow your intuition and decorate with our fun toppings, cool magnets or with a nice card on magnetic wall shelf. Give your wall a sparkling upgrade.
INFORMATION
PRODUCTION
Made In Europe
CLOTH
Washable with a damp cloth
DIAMETER
- Centimeter : 60 cm
- Inches : 23.62" in
USE
Groovy Magnets magnetic stickers are suitable for use indoors.
PRODUCT TYPE
Magnetic Sticker
COLLECTION
Natural
FEATURE
Apply to a smooth, degreased surface using a hair dryer (see instructions and maintenance)
CLEAN
Degrease the surface with lukewarm water and cleaning vinegar. Rinse again with lukewarm water. Do not use ammonia when cleaning because it can affect the adhesive of the sticker. Slightly sandpaint walls and doors on acrylic basis or coatings. Let a freshly painted wall dry for at least two weeks before applying the wall stickers.
DOWNLOAD
ā Instructions & Maintenance
MATERIAL
-Metal -Wood -Gass Cardboard -Paper -Plastic
CARE & USAGE
-All our stickers are water-resistant. Clean with a damp cloth and a drop of washing-up liquid. -Remove stubborn streaks with a magic eraser (melamine sponge) and a drop of washing-up liquid -Writable stickers : Check the product page on our website for the right use of writing material suitable for your type of sticker.
DETAIL
-Including magnet set
-Premium quality -Receptive for magnets and toppings -Self-adhesive, suitable for walls, doors, cupboards.
FLAT / SMOOTH
Groovy Magnets magnetic stickers adhere to almost any smooth surface such as: metal, wood, glass, cardboard, paper, plastic, kitchen cupboards, smooth painted walls and doors. If necessary, smooth and sand down any bumps. Small bumps or unevenness in the surface can remain visible through the sticker after applying.
COLORS
APPLICATION
AVOID AIR TUNNELS
Stick the sticker on the wall within 2 hours after removing it from the packaging. When a rolled-up sticker is opened, air tunnels may occur in the backing sheet which can dry out the adhesive layer.
REMOVE THE STICKER
Warm the sticker with a hairdryer and carefully peel it off bit by bit. Always keep heating every piece well.
STICK IT ON
First remove part of the top of the backing sheet from the sticker. Position the sticker on the surface and press firmly. Now gently pull the back sheet further downwards and work your way to the bottom. Meanwhile, rub the sticker firmly with a soft cloth or a (soft) pressure roller.
TIP
In the rare case that the sticker would not adhere well to the substrate, we recommend supplementing with ready-to-use wallpaper adhesive.
QUALITY
Depending on the substrate or the quality of the painted surface, it will be easier to remove the sticker. The longer the sticker is on a substrate, the more firmly it sticks. For a smooth painted surface removing will be easier than for a wallpapered wall.
APPLY THE STICKER
To ensure that the glue sticks properly to the wall, a hair dryer comes into play. Heat the front and the edges of the sticker with a hair dryer and press firmly. The heat makes the glue supple and gives optimum adhesion.