Groovymagnets Magnetic Sticker Cranes On The Water

MAGNETIC STICKER CRANES ON THE WATER

Groovymagnets Magnetic Sticker Cranes On The Water

MAGNETIC STICKER CRANES ON THE WATER 

Unique magnetic sticker (Ƙ 60 cm) in Japanese style 'Under the wave' print. Stick this decorative and functional wall sticker on a smooth surface and hang a nice message or some pictures on it with magnets. This round sticker gives your interior a stylish upgrade.

INFORMATION

BRAND 

Groovymagnets

PRODUCT TYPE

Magnetic sticker

PRODUCTION

Made In Europe

DIAMETER 

60 cm (23.62")

DESIGN

100% Belgian design

USE CLOTH

Washable with a damp cloth

Groovymagnets Magnetic Sticker Cranes On The Water

USE INDOORS 

Groovy Magnets magnetic stickers are suitable for use indoors

APPLY 

Apply to a smooth, degreased surface using a hair dryer (see instructions and maintenance)

QUALITY

Premium quality

SUITABLE

-Walls -Ddoors -Cupboards

Groovymagnets Magnetic Sticker Cranes On The Water

FLAT / SMOOTH

Groovy Magnets magnetic stickers adhere to almost any smooth surface such as: metal, wood, glass, cardboard, paper, plastic, kitchen cupboards, smooth painted walls and doors. If necessary, smooth and sand down any bumps. Small bumps or unevenness in the surface can remain visible through the sticker after applying.

CARE & USAGE 

- Cleaning the sticker : All our stickers are water-resistant. Clean with a damp cloth and a drop of washing-up liquid.
- Remove : Remove stubborn streaks with a magic eraser (melamine sponge) and a drop of washing-up liquid

CLEAN 

Degrease the surface with lukewarm water and cleaning vinegar. Rinse again with lukewarm water. Do not use ammonia when cleaning because it can affect the adhesive of the sticker.

APPLICATIONS

AVOID AIR TUNNELS 

Stick the sticker on the wall within 2 hours after removing it from the packaging. When a rolled-up sticker is opened, air tunnels may occur in the backing sheet which can dry out the adhesive layer

REMOVE THE STICKER 

Warm the sticker with a hairdryer and carefully peel it off bit by bit. Always keep heating every piece well.

STICK IT ON 

First remove part of the top of the backing sheet from the sticker. Position the sticker on the surface and press firmly. Now gently pull the back sheet further downwards and work your way to the bottom. Meanwhile, rub the sticker firmly with a soft cloth or a (soft) pressure roller.

TIP 

In the rare case that the sticker would not adhere well to the substrate, we recommend supplementing with ready-to-use wallpaper adhesive. 

QUALITY

Depending on the substrate or the quality of the painted surface, it will be easier to remove the sticker. The longer the sticker is on a substrate, the more firmly it sticks. For a smooth painted surface removing will be easier than for a wallpapered wall.

APPLY THE STICKER 

To ensure that the glue sticks properly to the wall, a hair dryer comes into play. Heat the front and the edges of the sticker with a hair dryer and press firmly. The heat makes the glue supple and gives optimum adhesion.