Groovymagnets Cassowary And Friend Magnetic Sticker
CASSOWARY AND FRIEND MAGNETIC STICKER
CASSOWARY AND FRIEND MAGNETIC STICKER
Unique round magnetic sticker (Ć 60 cm) crackled style with 'Cassowary and Friend' print. Stick this decorative and functional wall sticker on a smooth surface and add a nice message or some pictures with magnets. This round sticker gives your interior a stylish upgrade.
INFORMATION
PRODUCTION
Made In Europe
PRODUCT TYPE
Magnetic Sticker
SHAPE
Round
DIAMETER
60 cm | 23.62"
DOWNLOAD
ā Instructions & Maintenance
APPLY
Apply to a smooth, degreased surface using a hair dryer (see instructions and maintenance)
BRAND
Groovymagnets
CLOTH
Washable with a damp cloth
COLLECTION
Magnetic
DETAIL
- Receptive for magnets and toppings
- Self-adhesive, suitable for walls, doors, cupboards...
- Including magnet set
- Premium quality
FLAT / SMOOTH
Groovy Magnets magnetic stickers adhere to almost any smooth surface such as: metal, wood, glass, cardboard, paper, plastic, kitchen cupboards, smooth painted walls and doors. If necessary, smooth and sand down any bumps. Small bumps or unevenness in the surface can remain visible through the sticker after applying.
FEATURE
Apply to a smooth, degreased surface using a hair dryer (see instructions and maintenance)
CLEAN
Degrease the surface with lukewarm water and cleaning vinegar. Rinse again with lukewarm water. Do not use ammonia when cleaning because it can affect the adhesive of the sticker. Slightly sandpaint walls and doors on acrylic basis or coatings. Let a freshly painted wall dry for at least two weeks before applying the wall stickers.
USE
Groovy Magnets magnetic stickers are suitable for use indoors.
CARE & USAGE
- All our stickers are water-resistant. Clean with a damp cloth and a drop of washing-up liquid.
- Remove stubborn streaks with a magic eraser (melamine sponge) and a drop of washing-up liquid
- Writable stickers : Check the product page on our website for the right use of writing material suitable for your type of sticker.
APPLICATION
AVOID AIR TUNNELS
Stick the sticker on the wall within 2 hours after removing it from the packaging. When a rolled-up sticker is opened, air tunnels may occur in the backing sheet which can dry out the adhesive layer.
REMOVE THE STICKER
Warm the sticker with a hairdryer and carefully peel it off bit by bit. Always keep heating every piece well.
STICK IT ON
First remove part of the top of the backing sheet from the sticker. Position the sticker on the surface and press firmly. Now gently pull the back sheet further downwards and work your way to the bottom. Meanwhile, rub the sticker firmly with a soft cloth or a (soft) pressure roller.
APPLY THE STICKER
To ensure that the glue sticks properly to the wall, a hair dryer comes into play. Heat the front and the edges of the sticker with a hair dryer and press firmly. The heat makes the glue supple and gives optimum adhesion.
QUAILITY
Depending on the substrate or the quality of the painted surface, it will be easier to remove the sticker. The longer the sticker is on a substrate, the more firmly it sticks. For a smooth painted surface removing will be easier than for a wallpapered wall.
TIP
In the rare case that the sticker would not adhere well to the substrate, we recommend supplementing with ready-to-use wallpaper adhesive. All information about the right glue.