Groovymagnets Magnetic Sticker 3 Circles
Magnetic Sticker 3 Circles
MAGNETIC STICKER 3 CIRCLES
Use this set of self-adhesive stickers as a ferrous underground for magnets or use to hold up functional accessoires such as the magnetic lamp, magnetic wallplanter, metal magnetic shelf or flower vase.
INFORMATION
PRODUCTION
Made in Belgium
WASH
Washable with a Damp Cloth.
WRITABLE MAGNETIC STICKER
- Writable with soft chalk. Avoid liquid chalk markers, as they leave permanent marks
- Clean with a damp cloth. Remove stubborn marks with a wonder (melamine)-sponge with a dash of cleaning vinegar and a drop of washing- up liquid
PENCIL
Writable With Multi Pencil
DIAMETER
Ø 14, 19 & 26.5 cm (set of 3)
APPLY
Apply To A Smooth, Degreased Surface Using A Hair Dryer
THE RIGHT UNDERGROUND/ PREPARATION
CLEAN
Degrease the surface with lukewarm water and cleaning vinegar. Rinse again with lukewarm water. Do not use ammonia when cleaning because it can affect the adhesive of the sticker.
USE INDOORS
Groovy Magnets magnetic stickers are suitable for use indoors.
FLAT / SMOOTH
-Groovy Magnets magnetic stickers adhere to almost any smooth -Surface such as: metal -Wood, glass -Cardboar -Paper -Plastic -kitchen cupboards -Smooth painted walls and doors. If necessar -Smooth and sand down any bumps. Small bumps or -Unevenness in the surface can remain visible through the sticker after applying
PRINTS
- 3 Circles - Gold
- 3 Circles - White
APPLICATION
AVOID AIR TUNNELS
Stick the sticker on the wall within 2 hours after removing it from the packaging. When a rolled-up sticker is opened, air tunnels may occur in the backing sheet which can dry out the adhesive layer.
STICK IT ON
First remove part of the top of the backing sheet from the sticker. Position the sticker on the surface and press firmly. Now gently pull the back sheet further downwards and work your way to the bottom. Meanwhile, rub the sticker firmly with a soft cloth or a (soft) pressure roller
APPLY THE STICKER
To ensure that the glue sticks properly to the wall, a hair dryer comes into play. Heat the front and the edges of the sticker with a hair dryer and press firmly. The heat makes the glue supple and gives optimum adhesion
REMOVE THE STICKER
Warm the sticker with a hairdryer and carefully peel it off bit by bit. Always keep heating every piece well. Depending on the substrate or the quality of the painted surface, it will be easier to remove the sticker. The longer the sticker is on a substrate, the more firmly it sticks. For a smooth painted surface removing will be easier than for a wallpapered wall.