Groovymagnets Magnetic Sticker Marble
MAGNETIC STICKER MARBLE
MAGNETIC STICKER MARBLE
This unique magnetic sticker (Ć 60 cm) with marble print 'rosette'gives a natural feel to your home or office.
Stick a note or photos on the sticker with magnets or plant a flower in a wall planter.
Also very stylish with a wooden magnetic shelf or magnetic lamp.
INFORMATION
BRAND
Groovymagnets
PRODUCT TYPE
Magnetic sticker
PRINT
Marble Print
DIAMETER
60 cm (23.62")
DESIGN
100% Belgian design
USE CLOTH
Washable with a damp cloth
DOWNLOADS
ā Instructions & Maintenance
USE INDOORS
Groovy Magnets magnetic stickers are suitable for use indoors.
APPLY
Apply to a smooth, degreased surface using a hair dryer (see instructions and maintenance)
QUALITY
Premium quality
SUITABLE
-Walls -Ddoors -Cupboards
FLAT / SMOOTH
Groovy Magnets magnetic stickers adhere to almost any smooth surface such as: metal, wood, glass, cardboard, paper, plastic, kitchen cupboards, smooth painted walls and doors. If necessary, smooth and sand down any bumps. Small bumps or unevenness in the surface can remain visible through the sticker after applying.
CLEAN
Degrease the surface with lukewarm water and cleaning vinegar. Rinse again with lukewarm water. Do not use ammonia when cleaning because it can affect the adhesive of the sticker
CARE & USAGE
- Cleaning the sticker : All our stickers are water-resistant. Clean with a damp cloth and a drop of washing-up liquid.
- Remove : Remove stubborn streaks with a magic eraser (melamine sponge) and a drop of washing-up liquid.
COLOURS
- Rosette
- white
- Emerald
APPLICATIONS
AVOID AIR TUNNELS
Stick the sticker on the wall within 2 hours after removing it from the packaging. When a rolled-up sticker is opened, air tunnels may occur in the backing sheet which can dry out the adhesive layer.
QUALITY
Depending on the substrate or the quality of the painted surface, it will be easier to remove the sticker. The longer the sticker is on a substrate, the more firmly it sticks. For a smooth painted surface removing will be easier than for a wallpapered wall.
STICK IT ON
First remove part of the top of the backing sheet from the sticker. Position the sticker on the surface and press firmly. Now gently pull the back sheet further downwards and work your way to the bottom. Meanwhile, rub the sticker firmly with a soft cloth or a (soft) pressure roller.
TIP
In the rare case that the sticker would not adhere well to the substrate, we recommend supplementing with ready-to-use wallpaper adhesive.
REMOVE THE STICKER
In the rare case that the sticker would not adhere well to the substrate, we recommend supplementing with ready-to-use wallpaper adhesive.
APPLY THE STICKER
To ensure that the glue sticks properly to the wall, a hair dryer comes into play. Heat the front and the edges of the sticker with a hair dryer and press firmly. The heat makes the glue supp
