Groovymagnets Magnetic Sticker Marble Rosette

Magnetic sticker Marble Emerald

Groovymagnets Magnetic Sticker Marble Rosette
Groovymagnets Magnetic Sticker Marble Rosette

MAGNETIC STICKER MARBLE ROSETTE

This unique magnetic sticker (Ƙ 60 cm) with marble print 'rosette'gives a natural feel to your home or office.

Stick a note or photos on the sticker with magnets or plant a flower in a wall planter. Also very stylish with a wooden magnetic shelf or magnetic lamp.

Groovymagnets Magnetic Sticker Marble Rosette
Groovymagnets Magnetic Sticker Marble Rosette

INFORMATION 

Groovymagnets Magnetic Sticker Marble Rosette

WASH

Washable with a Damp Cloth.

PRODUCTION

Made in Belgium

Groovymagnets Magnetic Sticker Marble Rosette

PRINT

Marble Print

Groovymagnets Magnetic Sticker Marble Rosette

DIAMETER

60 cm (23.62")

PENCIL

Writable With Multi Pencil

APPLY

Apply To A Smooth, Degreased Surface Using A Hair Dryer

THE RIGHT UNDERGROUND/ PREPARATION

CLEAN

Degrease the surface with lukewarm water and cleaning vinegar. Rinse again with lukewarm water. Do not use ammonia when cleaning because it can affect the adhesive of the sticker.

USE INDOORS

Groovy Magnets magnetic stickers are suitable for use indoors.

FLAT / SMOOTH

-Groovy Magnets magnetic stickers adhere to almost any smooth -Surface such as: metal -Wood, glass -Cardboar -Paper -Plastic -kitchen cupboards -Smooth painted walls and doors. If necessar -Smooth and sand down any bumps. Small bumps or -Unevenness in the surface can remain visible through the sticker after applying

PRINTS

Groovymagnets Magnetic Sticker Marble Rosette
Rosette
Groovymagnets Magnetic Sticker Marble Rosette
White
Groovymagnets Magnetic Sticker Marble Rosette
Emerald

APPLICATION

AVOID AIR TUNNELS

Stick the sticker on the wall within 2 hours after removing it from the packaging. When a rolled-up sticker is opened, air tunnels may occur in the backing sheet which can dry out the adhesive layer.

STICK IT ON

First remove part of the top of the backing sheet from the sticker. Position the sticker on the surface and press firmly. Now gently pull the back sheet further downwards and work your way to the bottom. Meanwhile, rub the sticker firmly with a soft cloth or a (soft) pressure roller

APPLY THE STICKER

To ensure that the glue sticks properly to the wall, a hair dryer comes into play. Heat the front and the edges of the sticker with a hair dryer and press firmly. The heat makes the glue supple and gives optimum adhesion

REMOVE THE STICKER

Warm the sticker with a hairdryer and carefully peel it off bit by bit. Always keep heating every piece well. Depending on the substrate or the quality of the painted surface, it will be easier to remove the sticker. The longer the sticker is on a substrate, the more firmly it sticks. For a smooth painted surface removing will be easier than for a wallpapered wall.