Rols Trevi 320 Shale Carpet

TREVI 320 SHALE CARPET

Rols Trevi 320 Shale Carpet

TREVI 320 SHALE CARPET 

Trevi collection stands out for its softness and sheen. The tufted surface creates a subtle shine that adds dimension with each step.

Trevi is also wear-resistant, suitable for busy areas such as shops or hotels. The collection is available in 12 shades of grey, beige, and navy that add a sophisticated touch to any environment.

INFORMATION

BRAND

Rols

PRODUCT TYPE

Carpet

COMPOSITION

Nylon

QUALITY 

Soft

MANUFACTURING METHOD

Tufting

COLOUR FASTNESS TO LIGHT 

The pile yarns in our carpets are manufactured using dyeing techniques that meet strict environmental regulations. In common with all other dyed textiles, carpet will lose colour if exposed to sustained sunlight. Light colours have a lower light fastness to light than darker colours and the use of blinds or other window treatments will help to protect carpet from fade especially in areas where sunlight falls ont the carpet for extended periods of time. Colour fading is not considered a manufacturing defect.

Rols Trevi 320 Shale Carpet

PILE SURFACE 

Cut Pile

PILE HEIGHT 

± 10.0 mm

WIDTH

Up to 4 meters

SHAPE

Rectangular & Circular

MAIN CHARACTERISTICS

- Antistatic behaviour (ISO 6356)
- CFls1 fire certification (EN 13501-1)
- Suitable for use with underfloor heating
- Intensive commercial use with class of use 33 (EN 1307)
- Tufted on a 1/10’ machine with a cut pile surface (10 mm pile height)

ENVIRONMENT 

Indoor

MANUFACTURING WIDTH

4 m

Rols Trevi 320 Shale Carpet

PRODUCTION

Made in Spain

PILE WEIGHT

± 1.450 g/m²

TOTAL WIEGHT APPROX.

± 2.300 g/m²

UV TREATMENT

UV treatment incorporated in fibers allowing for indoor and outdoor use with colorfastness to light >6 (ISO 105-B02)

CARE

-Vacuuming carpets is one of the main methods to keep them in good condition and essential to reduce the presence and accumulation of loose particles of dirt/sediment. -For cleaning specific stains, never rub the surface to remove a stain or spilled substance, as this can deform the surface irreversibly. It is also not recommended to apply excessive pressure as this can flatten the carpet.

BACKING 

Action Back

TOTAL THICKNESS

± 12.5 mm

COLORS

ALL COLORS

Rols Trevi 320 Shale Carpet
Plein Air
Rols Trevi 320 Shale Carpet
Shale
Rols Trevi 320 Shale Carpet
Moss
Rols Trevi 320 Shale Carpet
Eventide
Rols Trevi 320 Shale Carpet
Buttercream
Rols Trevi 320 Shale Carpet
Brilliant White
Rols Trevi 320 Shale Carpet
Quicksilver
Rols Trevi 320 Shale Carpet
Sailor Blue
Rols Trevi 320 Shale Carpet
Frost Gray
Rols Trevi 320 Shale Carpet
Portabella
Rols Trevi 320 Shale Carpet
Beige
Rols Trevi 320 Shale Carpet
Mink

CHARACTERISTICS

TECHNICAL DEVELOPMENTS 

The Company reserves the right to modify individual or multiple components of the carpet specification, without notice, where performance is not affected, to give the customer the advantage of the latest technical developments.

COLOUR, PATTERN AND TEXTURAL BATCH MATCHING 

Slight differences will exist between different production batches and dyelots. Where a precise match is required, we recommend a stock cutting from the current material batch is requested before order placement.

COLOUR FASTNESS TO SHAMPOO

Slight fading of colours over time is normal as the dyes used to colour the carpet are not inherent to the fibres. It is important to use a PH neutral shampoo on our carpets. Some degree of colour fading due to cleaning is not considered a manufacturing defect.

PERMANENT PILE REVERSAL 

It is possible that this effect can occur very soon after installation or take an undetermined period to manifest. The phenomenon, which is sometimes referred to as watermarking, creates a permanent and irreversible shade difference on the pile surface. The effects are most noticeable on plain or lightly patterned cut pile carpets and will occur at random. For this reason, these effects will not be considered as manufacturing defects.

PILE CRUSH & TRACKING

Through use and in time, the pile fibre of all carpets will flatten to a certain degree. This will be especially noticeable in areas of concentrated wear such as, but not limited to, principal walkways and stairs.

COLOUR APPEARANCE

Different light sources can alter the perception and appearance of a colour. It is recommended to view a sample at the final location under actual light conditions prior to making the carpet selection. All our colours are matched to light code D65 (6500K). This is an important consideration when carpets are viewed under different light sources.

SURFACE APPEARANCE 

All quality carpets, whether made from natural or man-made fibres, will contain minor variances of texture within the pile surface. These small textural variations may be more noticeable under certain light sources. They are an inherent characteristic and are not considered a manufacturing defect.

APPEARANCE RETENTION 

All carpets will change appearance over time primarily due to foot traffic. Matting of the carpet surface generally occurs as a result of pile flattening combined with the entanglement of fibres from different tufts, as the yarn loses elasticity and the twist profile changes. It is likely to occur in areas of concentrated use and will cause a loss of pattern definition.

LONG TUFTS 

Occasionally you may find a random tuft that protrudes above the surface of your carpet. Do not pull it out. If the carpet is of a cut pile structure, using sharp scissors, carefully cut the long tuft level with the surrounding pile. If the carpet is of a loop pile structure, using a needle or similar pointed tool, push the base of the long tuft down into the backing materials. If in doubt, use a professional carpet cleaner to undertake the repair.

SHADING 

All pile carpets, especially plain or low coverage patterns (where there is a predomination of one or more colours) are liable to an effect variously referred to as “pile pressure”, “shading” or “watermarking”. That means there may be the appearance of light and dark patches arising from the unequal crushing of the pile surface. No care on the part of the manufacturers can obviate these tendencies, which are inherent in all pile fabrics, including carpets. These characteristics will not be considered as manufacturing defects.

PILE BANDING 

Carpet is stored in a roll form. In storage, the weight of the roll creates a downward pressure which can cause a slight crushing of the surface of the pile, which when unrolled can show as a light band across the width of the carpet. This characteristic is perfectly normal and will disappear in a few weeks after installation as the pile becomes conditioned to the local environment and is subjected to use and regular vacuuming.

STATIC ELECTRICITY 

When the atmosphere in a room is dry, static electricity can build up in the carpet. This may be counteracted by maintaining the environment at a higher level of humidity, either using a mechanical humidifier or with well-watered leafy indoor plants (remembering to position the pots into a non-permeable flat saucer). An antistatic spray can also be applied, but these should be used with care and should not come into contact with other surfaces within the interior scheme.

TEMPORARY CARPET PROTECTION 

We do not recommend the use of temporary protective films containing a tackifier in conjunction with our carpet. It the carpet needs to be protected to allow temporary works (our recommendation would be to uplift the carpet until work is completed), use an adhesive free protective sheeting system with surface tape joints to avoid an adhesive residue being left on the carpet as this may create the conditions for accelerated soiling in the pile.

DISCLAIMER

All information provided above is given in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of information in this booklet or on our website. Under no circumstances shall we have any liability to you for loss or damage of any kind incurred as a result of the use this information. Your reliance on this information is solely at your own risk.

CARPET PLANNING AND INSTALLATION – STAIRS 

Special consideration must be given to the installation of carpets on stairs. The profile of the stair treads and risers must meet minimum national regulations and we do not recommend carpet is installed on stairs where the tread is less than 250mm. The stair nosing should always be rounded to a minimum diameter of 25mm. The stair nosing is a point of high friction and to provide support to the carpet in an area of high traffic intensity stair carpets must be installed in conjunction with a highquality heavy use underlay that covers the tread, nosing and riser. All carpets are subject to some degree of bowing or skewing in the width. Bowing of up to 40mm over any single width of carpet should be considered as an acceptable tolerance.