
Tonin Casa Anemos Wall Mirrors
ANEMOS WALL MIRRORS
ANEMOS WALL MIRRORS
Design By Maurizio Scutellà
The gentle breeze of elegance can blow in any room with the Anemos mirror, whose name alludes to the wind that seems to move the mirror element, a design piece imbued with charm that testifies to the continuous search for unique and precious processing techniques.
INFORMATION
BRAND
Tonin Casa
PRODUCT TYPE
Wall Mirrors
COLLECTION
Anemos
MATERIALS
Curved Mirror glass 5 mm thickness. Wall-mounted fixing supports made out of steel profile. Assembling accessories in ferrous material.
CLEANING
Use a white, wet cloth (make sure it is not dripping). Whenevere using detergents, make sure they were developed specifically for the finishing you own.
PRODUCTION
100% Made in Italy
DESIGNER
Maurizio Scutellà
ATTENTION
This data sheet conforms to law no. 126 dated 10th April 1991, “Standards for consumer information” and with Decree no. 101 dated 8th February 1997, “Actuation Regulations”.
DISPOSAL
Cardboard and other packaging elements, once placed into the proper trash collecting container will be completely recycled. Once discarded, the furniture components must not be dispersed in the environment but instead handed over to the proper Council system of disposal, accordingly to local legislation.
This furniture unit must be assembled by specialized personnel. The manufacturer denies all liability for any damage due to non-compliance with the attached instructions. The warranty is not valid for damage caused by incorrect use of the product or damage during transport.
NOTE
The wallplug can be used on most building materials, such as:
- Concrete
- Porous concrete
- Solid and hollow bricks
- Stone and solid materials
- Please, make sure the wallplug can be applied onto the wall safely; may the given wallplug be non-adatable to such wall, substitute it with a proper one.
USE
Use the mirror only for the use for which it is intended. If present, at the time of assembly, carefully follow the assembly instructions.
- Do not use outdoors.
- Do not climb on the mirror
- Avoid dragging the mirror
- Avoid colliding into other objects that may scratch the surface.
- Do not expose to direct sunlight in order to avoid chromatic alterations.
- Avoid exposing the mirror to water or other liquids, even if for a short time.
- Do not expose the mirror to direct heat sources exceeding 50°C (122°F).
- Avoid operating on the products parts if such operation is not carried out by professionals.
